How to Fix HDMI Port on Xbox one – 4 Ways to Follow

How to Fix HDMI Port on Xbox one

How to Fix HDMI Port on Xbox one – 4 Ways to Follow

If your Xbox One tells you it can’t find an HDMI input when you boot it up, or if the signal to your TV keeps dropping out, there are a few steps you can take to try and fix this problem yourself.

Read Also:HOW TO CHANGE APPLE ID ON APPLE WATCH – EASY STEPS

In this post, we’ll walk through four techniques that may help get your gaming console back up and running.

Clean the HDMI port.

The first step you should take if your HDMI port on your Xbox One is not working is to clean out the port. You can do this by using a soft brush and dry cloths, but make sure that you don’t use any liquids or chemicals to clean the port. Also, be careful not to use paper towels or abrasive materials.

Use a compressed air can to clean the port.

Now that you’ve unscrewed the back of your Xbox One and removed its HDMI port, you can use a compressed air can to clean it. Just spray some air into the port, then use a soft brush to remove any excess debris.

If none of these solutions work for you, try using a dry cloth to dry off the inside of the HDMI port when you’re done cleaning it with compressed air or water (if necessary).

Rotate the HDMI cable.

If your Xbox One has stopped outputting video to the TV, try rotating the HDMI cable 90 degrees and then reattaching it to the console. If this does not work, try connecting another HDMI cable or contact the manufacturer for a replacement.

If you are still having trouble with gaming on your Xbox One after following these steps, there might be a problem with your console itself. In this case, you will need to contact Microsoft support for further assistance

Try using a different HDMI cable.

If you’re able to use the HDMI port on your Xbox One with other devices, there might be something wrong with the cable. Try swapping out the HDMI cable for another one and see if it fixes your issue.

If that doesn’t work, try using a different port on your TV or monitor. If this works, then there are problems with one of your ports and not necessarily the console itself or its HDMI jack.

You must clean the port using a soft brush and dry cloths.

You must clean the port using a soft brush and dry cloths. The way you clean it depends on your situation:

If there is some visible dirt, use a soft brush to remove as much of it as possible. Then use a dry cloth to wipe away any remaining dust and residue from the port.

If you have water damage or corrosion, do not try to clean the HDMI port yourself; this can cause permanent damage and make it unusable. Instead, take your Xbox One back to the store where you purchased it for repair or replacement

Conclusion

In this article, we’ve talked about a few ways to fix HDMI port on Xbox One. We hope that you have found a solution to your problem. If you have any questions or comments, please leave them in the comment section below.

Add a Comment

Your email address will not be published.